Little Fwend Tonearm Lifter
Little Fwend comes in three different sizes, Low, High and Disco.
The Low model can be used under tonearms with clearance between the underside of the arm wand and the mounting surface as low as 32mm, up to 49mm.
The High model from 49mm, up to 82mm. Height is adjusted by a set screw in the base. The appropriate hex key is enclosed.
The DISCO model is designed for, and compatible with the Technics 1200 turntables both old and new.
Please measure the distance from mounting/plinth surface up to the underside of tonearm wand. Take the measurement when the tonearm has correct VTA and the needle is in the groove. Subtract approx. 1mm from this distance, to make sure there will be safe clearance between the rubber beam and the moving tonearm.